Coating Products

You can now buy our supplies online. Click here and you will be directed to our store.

: Items with this icon will have an additional HAZARDOUS MATERIALS SHIPPING CHARGE.

	Lascaux Products
Incralac
Special Lacquer for Copper, Brass and Bronze Protection Developed by INCRA (International Copper Research Association) expressly for copper-bearing alloys. Most clear coating failures on bronze, brass and copper are due to underfilm staining and tarnishing. INCRALAC contains benzotriazole as a chelating agent to prevent this action. Affords superior resistance to ultraviolet light; excellent resistance to salt air environments. Can be expected to provide at least 5 years protection (normal exterior with 1 ml thick coat). Remove with conventional paint strippers. Air dries to touch and recoat in 30 minutes; complete cure in 48 hours. 13% solids. Thin with toluene. Now available in a water-based formula that dries to a slightly harder finish. Can be thinned with N-Methyl-2-Pyrolidinone. Water based formula does not ship as a hazardous material.
F4006-032	quart, solvent based	$27.00
F4006-128	gallon, solvent based	$82.00
F4007-032	quart, water based	$27.00
F4007-128	gallon, water based	$82.00
Soluvar Varnish
A removable picture varnish. Colorless, highly durable, non-tacky and non-yellowing. For use on acrylic and polymer colors, oil color, casein and tempera paintings , so that traditional cleaning, restoring and revarnishing can be accomplished. Easily and safely removed, even after many years, using Stoddard solvent, mineral spirits or turpentine.
F4010-032	(gloss), quart	$32.70
F4011-032	(matte), quart	$32.70
Tinuvin 292
A hindered amine light stabilizer to be added to LMW resins and rubber.
F4013-002	2 oz	$6.75
Laropal K-80
Laropal K-80 is the name for Ketone Resin N. It is pale in color, light-stable and non-hydrolysable. K-80 is soluble in most organic solvents - Stoddard Solvent, VM&P naphtha, ketone (except acetone), toluene, turpentine and methylene chloride. It is not soluble in methanol, it is only partially soluble in ethanol, but better in the higher alcohols. K-80 softens at 75-85°C and is neutral in its pH.
F4014-001	1 kg	$25.95
Butvar B-98
White, free flowing powders. Generally soluble in alcohols, acetone and aromatic hydrocarbons. Forms films similar to polyvinyl acetate and is suggested as picture varnishes. Widely used to waterproof textiles. The films resist degradation by sunlight and heat. Excellent resistance to alcohols. Average molecular weight is 30-34,000.
F4001-001	1 kg	$46.12
PVA Marking Varnish
F4002-016	pint	$17.95
Gum Damar # 1
Technically a resin and therefore insoluble in water, Gum Damar # 1 is the most suitable type for artists simple solution varnishes. Damar varnish retains it colorless appearance longer than any other common varnish.
F4003-500	500 grams	$12.00
Regalrez 1094
A LMW resin that is more stable than Arkon P-90. Extensively age tested as a picture varnish to replace the less stable natural resins and ketone resins. High quality of UV stability for its type of hydrocarbon resin.
F4016-001	1 kg	$11.75
Acryloid (Paraloid) F-10
Acryloid (Paraloid) F-10 is a butyl methacrylate polymer. This resin is medium in hardness and elasticity. While it possesses the water-white color, transparency and resistance to discoloration of the other Acryloid grades, it is somewhat less resistant to acids and alkalis and offers no resistance to petroleum hydrocarbons. Thus Acryloid F-10 makes possible acrylic coating which may be applied by brushing or dipping. Films of Acryloid F-10 tack-free at ordinary temperatures, but they become tacky at 100°F. This product is soluble in petroleum hydrocarbons. A few suggested uses: clear coatings on wood, cloth, metal and gravure inks. Acryloid F-10 is supplied at 40% solids in mineral thinner/Amsco Fat Solvent ratio of 9 to 1.
F4018-032	40%, quart	$22.00
F4018-128	40%, gallon	$69.00
Acryloid (Paraloid) B-67
Acryloid (Paraloid) B-67 is an Isobutyl Methacrylate polymer. This alkyd compatible acrylic ester resin is particularly designed to have good compatibility with paints and varnishes. Acryloid B-67 is a component of many coatings used in conservation, as for example picture varnishes. Soluble in acetone, methyl ethyl ketone, isopropanol, VM & P Naphtha and Stoddard Solvent. Custom Blends available.
100%
F4020-001	1 kg	$26.95
45%:
F4020-032	quart	$22.00
F4020-128	gallon	$69.00
Acryloid (Paraloid) B-72
Acryloid (Paraloid) B-72 - an Ethyl Methacrylate copolymer is an excellent general purpose resin. It can be applied in either clear or pigmented coatings by a variety of application methods and can be air-dried or baked. Acryloid B-72 has a very low reactivity with sensitive pigments. It is durable and non-yellowing and is compatible with other film forming materials such as vinyl cellulosics, chlorinated rubbers, and silicones and can be used in combination with them to produce coatings with a wide variety of characteristics with emphasis on stability and transparency. Acryloid (Paraloid) B-72 is unique in possessing a high tolerance for ethanol. This property allows its use in applications where strong solvents cannot be tolerated. The alcohol dispersions may be cloudy or milky; however, clear, coherent films are formed. Acryloid (Paraloid) B-72 is insoluble in isopropanol and mineral thinners. Supplied as the 100% solids resin.
F4022-001	100%, 1 Kg	$26.95
Acryloid (Paraloid) B-44
F4025-001	100%, 1 Kg	$26.95
Acryloid (Paraloid) B-48N
Acryloid (Paraloid) B-48N is a Methyl Methacrylate copolymer. It is unique in adhesion to bare and primed metals in addition to possessing toughness, flexibility and exterior durability. This resin has excellent block resistance and fast solvent release and is attractive for both air - drying and baking finishes. Suggested uses are as a coating for copper, bronze and zinc. Supplied at 45% solids in Toluene. Custom blends available
100%
F4026-001	1 Kg	$26.95
45%:
F4026-032	quart	$27.35
F4026-128	gallon	$83.95
Kraton G1657 or G1650
A rubber additive used in conjunction with Regal Rez 1094.
F4029-100	G 1657, 100 grams	$3.75
F4030-100	G 1650, 100 grams	$3.75
Rhoplex AC-73
A low viscosity acrylic emulsion which yields somewhat harder films than AC-234 when it dries. The films have unique adhesion properties. Usually used in conjunction with Rhoplex AC-234. 46-47% solids, pH 9.0 -10.0
F4244-032	quart	$18.55
F4244-128	gallon	$60.35
Rhoplex N-580
N-580 is an acrylic emulsion in water, pH 7.5 to 8.5, 55% solids, which when applied to a surface and allowed to dry, leaves a pressure sensitive acrylic film with high tack and moderate peel adhesion. The acrylic film resist yellowing upon aging. N-580 films have been applied to mounting boards and used as a means of holding art works in position in a framing system.
F4248-032	quart	$19.00
F4248-128	gallon	$45.85
Rhoplex Multilobe 200
F4254-032	quart	$12.00
F4254-128	gallon	$27.75
F4254-005	5 gallon	$128.00
Rhoplex MC-76
Rhoplex MC-76 is a fairly standard acrylic resin emulsion designed for formulation into coatings for cement and masonry surfaces. It is milky white in appearance and low in viscosity. It is shipped at a solids content of 46 to 48% with a pH of 9.5 to 10.0. It’s minimum film forming temperature is 10°C.
F4250-032	quart	$18.00
F4250-128	gallon	$37.85
F4250-005	5 gallon	$153.00
Rhoplex 1950
This is a replacement for LC-67.
F4252-016	quart	$19.00
F4252-128	gallon	$45.85
F4252-005	5 gallon	$190.00
Premium Leather Dressing
New formula with no solvents. Made of Lanolin and Neatsfoot oil.
F4005-016	Pint	$8.50
F4005-008	1/2 Pint	$5.50
Beva 371 Adhesive
F4400-128	gallon	$ 75.00
Beva Gel
F4410-128	gallon	$ 75.00
Beva D8 Dispersion
F4420-128	gallon	$75.00
Beva Film
F4440-020	2.5 mil, 27" x 20'	$ 99.00
F4441-020	1.0 mil, 27" x 20'	$ 99.00
Acrysol
F4239-032	WS-24, quart	$21.00
F4239-128	WS-24, gallon	$74.00
F4240-032	ASE-60, quart	$18.55
F4240-128	ASE-60, gallon	$68.50