MSC Cold Suction Table Accessories

Moisture treatments on fragile items like pastels, charcoals, and watercolors can be done with precision and ease with the MSC Moisture Dome. The MSC Moisture Dome retains moisture from an ultrasonic humidifier during treatments such as moisture relaxation, conditioning, wetting and relining. The clear acrylic curved dome attaches to the rear of any MSC Suction Platen with quick-release stainless steel hinges. Each dome is approximately 43 cm (17 inches) in height. Four circular inspection ports, 15.2 cm (6 inches) in diameter, allow entry into the dome without releasing the entire moistened atmosphere. Additional inspection ports can be installed by special order. Removable air pistons support the dome when raised and keep it raised with no extra effort.

• CAUTION! THE ACRYLIC DOME IS FOR MOISTURE APPLICATIONS ONLY! This dome is not suitable for fumigation applications or any other procedures involving the use of toxic chemicals.
• WARNING! USE OF SUCTION WHILE THIS DOME IS DOWN WILL COLLAPSE THE DOME. Use of the dome in this manner is contrary to the operating instructions.

This electric support stand allows full tilt or level use for any MSC Suction Platen. The height adjusts to the most comfortable working position. Locking caster wheels provide stability and mobility for the unit. An MSC Suction Platen attaches to the stand with four nuts and bolts. Unit 0263 features electric tilt and height adjustment. All other units are manual tilt, and electrical height adjustment.
Electrical
• 120/230 VAC 50/60 Hz 1Ø 240 watts.

The MSC Control Console contains one or two motors, depending on the size and use of the suction platen to which it will be connected. The duel motor console produces an unconstrained airflow of approximately 339 meters cubed per hour - m³/h (200 cubic feet per minute - CFM). It can sustain vacuum levels up to 2500 mm H₂O (100 inches H₂O). Dual motor consoles contains a variable speed controller, a vacuum gage, an airbrush and air compressor, a liquid catch basin, an activated charcoal filter for fume capture, a noise muffler, casters, and an exhaust hose that can connect to a fume hood or outside vent. The MSC Control Console is constructed of high-density polyethylene (HDPE), so it is easy to clean with soap and water. The suction motors in the MSC Control Console are durable, long lasting and maintenance free. The motors are rated at 700 hours of continuous use. Each unit has circuit breakers to protect the motors.

• More information about MSC Control Consoles on the Vacuum Pumps and Suction Motors page.

Electrical
• 120 VAC 50/60 Hz 1800 watts (single motor console)
• 220-240 VAC 50/60 Hz 2990 watts (dual motor console)

The Tiger-Vac vacuum cleaner has a powerful bypass suction motor at almost the same performance level as the single motor MSC Control Console. Vacuum levels up to 2500 mm H₂O (100 inches H₂O or 25 kPa). The suction motor produces an unconstrained airflow of approximately 178 meters cubed per hour - m³/h (100 cubic feet per minute - CFM). The motor controller allows fine adjustment of the vacuum and airflow. The Tiger-Vac Vacuum comes equipped with a HEPA filter for mold removal. Each Tiger-Vac Vacuum cleaner comes with one #4 tool kit containing four attachments, a Micro Vacuum Tool Kit and an exhaust hose that can connect to a fume hood or outside vent.

• More information about the Tiger-Vac Vacuum on the Vacuum Pumps and Suction Motors page